Putting in customized curtain rods can elevate the look of any room, adding a contact of style and personalization. Nevertheless, it’s not so simple as just drilling a couple of holes and hanging up your curtains. Small mistakes can lead to crooked rods, curtains that don’t dangle properly, and even damage to your walls. To save lots of yourself from frustration and extra work, here are 5 common mistakes to avoid when installing custom curtain rods.
1. Neglecting to Measure Properly
One of the biggest mistakes people make is skipping the measurement step or doing it incorrectly. Curtain rods have to be placed at a precise height and width to ensure the curtains look balanced and functional.
– Why It’s a Problem: Should you don’t measure accurately, your curtains may end up being too short, too long, or not wide sufficient to cover the window.
– Methods to Keep away from It: Use a tape measure to determine the height the place you want your rod to sit. Typically, rods must be put in 4-6 inches above the window frame for a taller room appearance. Also, extend the rod 3-6 inches past the window frame on either side to allow for full curtain coverage and smooth opening.
2. Selecting the Incorrect Hardware
Not all curtain rods and brackets are created equal. Choosing the mistaken hardware can lead to instability or problem in hanging your curtains.
– Why It’s a Problem: Heavy curtains on flimsy rods can cause the rod to sag or even collapse. Similarly, using the flawed type of screws or wall anchors can lead to rods pulling out of the wall over time.
– Methods to Avoid It: Check the load of your curtains and select rods that can assist them. For heavy drapes, opt for sturdy rods with reinforced brackets. If you’re installing into drywall, use appropriate anchors to make sure a secure hold.
3. Ignoring Wall Material
Not all walls are the identical, and the type of wall you’re working with determines the installation approach and tools required.
– Why It’s a Problem: Failing to consider wall material can lead to unstable installations. For example, nails or screws inserted directly into drywall without anchors will likely loosen over time.
– Tips on how to Avoid It: Establish whether your wall is drywall, plaster, concrete, or wood. For drywall, always use anchors. For concrete walls, you’ll need a masonry drill bit and anchors. Tailoring your approach to the wall material ensures a secure and long-lasting installation.
4. Hanging the Rod Too Low
It’s tempting to install curtain rods just above the window frame, however this mistake can make your room look smaller and the window seem shorter.
– Why It’s a Problem: Curtains which might be hung too low can visually cut off the height of your room, making it really feel cramped and less inviting.
– The right way to Keep away from It: Always goal to hang the curtain rod higher than the window frame—typically four-6 inches above, and even closer to the ceiling for a dramatic effect. This trick draws the eye upward and makes your ceilings seem taller.
5. Forgetting to Level the Rod
A crooked curtain rod can ruin the general aesthetic of your room, regardless of how stunning the curtains are.
– Why It’s a Problem: Uneven rods make curtains hold awkwardly, which is noticeable and unattractive.
– How you can Avoid It: Always use a level before drilling or attaching brackets. Mark your measurements on the wall with a pencil and double-check for accuracy. Even a slight tilt could be noticeable, so take your time to ensure perfection.
Bonus Suggestions for a Flawless Curtain Rod Installation:
– Pre-Check Your Curtains: Earlier than putting in the rod, make positive the curtain length and style match your planned rod height and width.
– Use a Template: If installing multiple rods, create a template to ensure uniform placement throughout the house.
– Consider Aesthetic: Match the rod style and finish to your room’s decor for a cohesive look.
Putting in custom curtain rods doesn’t should be a hassle. By avoiding these frequent mistakes and following the guidelines above, you may achieve a elegant, professional-looking end result that enhances your space. A little extra time spent on preparation and attention to element will save you from headaches down the road and provides your windows the proper frame they deserve.
If you liked this article and also you would like to receive more info pertaining to www.ironrods.com kindly visit our own web page.