Installing customized curtain rods can elevate the look of any room, adding a contact of style and personalization. However, it’s not so simple as just drilling a couple of holes and hanging up your curtains. Small mistakes can lead to crooked rods, curtains that don’t hang properly, and even damage to your walls. To save your self from frustration and additional work, listed below are 5 frequent mistakes to avoid when putting in customized curtain rods.
1. Neglecting to Measure Properly
One of the biggest mistakes people make is skipping the measurement step or doing it incorrectly. Curtain rods must be placed at a exact height and width to make sure the curtains look balanced and functional.
– Why It’s a Problem: For those who don’t measure accurately, your curtains may end up being too brief, too long, or not wide sufficient to cover the window.
– The right way to Avoid It: Use a tape measure to determine the height where you want your rod to sit. Typically, rods ought to be installed four-6 inches above the window frame for a taller room appearance. Also, extend the rod three-6 inches past the window frame on either side to permit for full curtain coverage and smooth opening.
2. Choosing the Wrong Hardware
Not all curtain rods and brackets are created equal. Choosing the fallacious hardware can lead to instability or problem in hanging your curtains.
– Why It’s a Problem: Heavy curtains on flimsy rods can cause the rod to sag or even collapse. Similarly, using the improper type of screws or wall anchors can result in rods pulling out of the wall over time.
– The best way to Avoid It: Check the weight of your curtains and select rods that may support them. For heavy drapes, opt for sturdy rods with reinforced brackets. Should you’re putting in into drywall, use appropriate anchors to ensure a secure hold.
3. Ignoring Wall Materials
Not all walls are the same, and the type of wall you’re working with determines the installation approach and tools required.
– Why It’s a Problem: Failing to consider wall material can lead to unstable installations. For instance, nails or screws inserted directly into drywall without anchors will likely loosen over time.
– The best way to Keep away from It: Identify whether or not your wall is drywall, plaster, concrete, or wood. For drywall, always use anchors. For concrete partitions, you’ll need a masonry drill bit and anchors. Tailoring your approach to the wall material ensures a secure and long-lasting installation.
4. Hanging the Rod Too Low
It’s tempting to put in curtain rods just above the window frame, but this mistake can make your room look smaller and the window appear shorter.
– Why It’s a Problem: Curtains which can be hung too low can visually lower off the height of your room, making it really feel cramped and less inviting.
– Tips on how to Avoid It: Always aim to hold the curtain rod higher than the window frame—typically four-6 inches above, or even closer to the ceiling for a dramatic effect. This trick draws the eye upward and makes your ceilings seem taller.
5. Forgetting to Level the Rod
A crooked curtain rod can ruin the overall aesthetic of your room, no matter how lovely the curtains are.
– Why It’s a Problem: Uneven rods make curtains cling awkwardly, which is discoverable and unattractive.
– The way to Avoid It: Always use a level before drilling or attaching brackets. Mark your measurements on the wall with a pencil and double-check for accuracy. Even a slight tilt can be discoverable, so take your time to ensure perfection.
Bonus Ideas for a Flawless Curtain Rod Set up:
– Pre-Check Your Curtains: Earlier than putting in the rod, make certain the curtain size and style match your deliberate rod height and width.
– Use a Template: If installing a number of rods, create a template to ensure uniform placement throughout the house.
– Consider Aesthetic: Match the rod style and finish to your room’s decor for a cohesive look.
Putting in custom curtain rods doesn’t need to be a hassle. By avoiding these frequent mistakes and following the ideas above, you’ll be able to achieve a sophisticated, professional-looking consequence that enhances your space. A little additional time spent on preparation and attention to element will save you from headaches down the road and provides your windows the right frame they deserve.
In the event you loved this article and you want to receive details with regards to https://ironrods.com/ i implore you to visit our site.