Putting in custom curtain rods can elevate the look of any room, adding a touch of style and personalization. However, it’s not so simple as just drilling a couple of holes and hanging up your curtains. Small mistakes can lead to crooked rods, curtains that don’t hold properly, or even damage to your walls. To save your self from frustration and further work, listed below are five common mistakes to keep away from when putting in custom curtain rods.
1. Neglecting to Measure Properly
One of the biggest mistakes folks make is skipping the measurement step or doing it incorrectly. Curtain rods must be placed at a exact height and width to make sure the curtains look balanced and functional.
– Why It’s a Problem: When you don’t measure accurately, your curtains might end up being too quick, too long, or not wide sufficient to cover the window.
– Methods to Avoid It: Use a tape measure to determine the height where you need your rod to sit. Typically, rods should be installed four-6 inches above the window frame for a taller room appearance. Also, extend the rod 3-6 inches beyond the window frame on either side to permit for full curtain coverage and smooth opening.
2. Choosing the Wrong Hardware
Not all curtain rods and brackets are created equal. Selecting the flawed hardware can lead to instability or difficulty in hanging your curtains.
– Why It’s a Problem: Heavy curtains on flimsy rods can cause the rod to sag and even collapse. Equally, utilizing the mistaken type of screws or wall anchors can lead to rods pulling out of the wall over time.
– The right way to Keep away from It: Check the burden of your curtains and select rods that can support them. For heavy drapes, go for sturdy rods with reinforced brackets. If you happen to’re installing into drywall, use appropriate anchors to make sure a secure hold.
3. Ignoring Wall Materials
Not all partitions are the same, and the type of wall you’re working with determines the installation approach and tools required.
– Why It’s a Problem: Failing to consider wall materials can lead to unstable installations. For example, nails or screws inserted directly into drywall without anchors will likely loosen over time.
– Tips on how to Avoid It: Identify whether or not your wall is drywall, plaster, concrete, or wood. For drywall, always use anchors. For concrete partitions, you’ll need a masonry drill bit and anchors. Tailoring your approach to the wall materials ensures a secure and long-lasting installation.
4. Hanging the Rod Too Low
It’s tempting to put in curtain rods just above the window frame, however this mistake can make your room look smaller and the window seem shorter.
– Why It’s a Problem: Curtains which are hung too low can visually reduce off the height of your room, making it feel cramped and less inviting.
– Tips on how to Keep away from It: Always aim to hang the curtain rod higher than the window frame—typically 4-6 inches above, or even closer to the ceiling for a dramatic effect. This trick draws the eye upward and makes your ceilings seem taller.
5. Forgetting to Level the Rod
A crooked curtain rod can ruin the overall aesthetic of your room, regardless of how beautiful the curtains are.
– Why It’s a Problem: Uneven rods make curtains cling awkwardly, which is discoverable and unattractive.
– How one can Avoid It: Always use a level earlier than drilling or attaching brackets. Mark your measurements on the wall with a pencil and double-check for accuracy. Even a slight tilt will be noticeable, so take your time to make sure perfection.
Bonus Suggestions for a Flawless Curtain Rod Installation:
– Pre-Check Your Curtains: Before putting in the rod, make positive the curtain size and style match your planned rod height and width.
– Use a Template: If installing multiple rods, create a template to ensure uniform placement throughout the house.
– Consider Aesthetic: Match the rod style and end to your room’s decor for a cohesive look.
Putting in customized curtain rods doesn’t should be a hassle. By avoiding these frequent mistakes and following the guidelines above, you can achieve a refined, professional-looking end result that enhances your space. A little further time spent on preparation and attention to detail will prevent from headaches down the road and give your windows the proper frame they deserve.
If you beloved this posting and you would like to obtain much more details about IronRods kindly check out our own web-page.